Glass Moisture
Have questions about our Moisture Sensors?
|
Having the correct moisture levels in silica (silicon dioxide)
mixtures has become a critical component during the various
stages of glass production.
The silica (silicon dioxide) mixtures can easily become either
too wet or dry wasting manufacturer's time and money as well
as impacting the quality of the end product.
With the help of industry partners and more than 30 years
of knowledge and experience, your MoistTech staff has developed
the IR-3000 Glass Moisture Sensor that is ideally suited to
measure the moisture levels in the glass making process.
Installation
The IR-3000 Glass Moisture Sensor should be mounted several
inches above the conveyor, before and after the dryer will
allow the user to continuously monitor the process and can
control the glass moisture content either manually or automatically
in the glass making process.
Environment
If the IR-3000 Glass Moisture Sensor has to be installed close
to the dryer outlet where it will be susceptible to extreme
heat conditions, it is necessary to cool the sensor with either
air or water.
Benefits.. improved product quality lower
energy costs reduced start-up times less waste 100% product
inspection less downtime Your professional MoistTech staff
is very experienced with the requirements in the production
of the glass making process. Our sensor calibrations, measurement
wavelengths, algorithms and sensor optical requirements are
pre-set at the factory. Typical accuracy is about ±0.1% moisture.
Typical analog range is 1-10% moisture. The outputs can be
adjusted to optimize PLC or recording requirements
Take a look at our other Chemical Moisture Sensor applications. |
