Controlling the correct detergent powder moisture levels has become a critical component during production.  Being such a porous material, detergent powders can easily become either too wet or dry wasting manufacturers time and money.

With the help of industry partners and 30 years of knowledge, MoistTech has developed the IR-3000 Detergent Powder Moisture Sensor which is ideally suited to measure the detergent powder moisture levels in the production process while improving manufactures product quality and lowering their energy costs. 
 

Installation….

By installing the IR-3000 Detergent Powder Moisture Sensor in the processing area, a manufacturer can continuously monitor the process and can control the detergent powder moisture content either manually or automatically.

To accurately measure the detergent powder moisture levels, the sensor should be installed over the conveyor transporting the detergent.  The sensor should be mounted several inches above the belt, screw conveyor or any area where the material can be viewed. 
 

Environment….

Generally, dust from the product is not a problem.  But, in extreme dusty environments, we recommend the installation of an air purge system to prevent the accumulation of material on the sensor’s window. 
 

Benefits….

improved product quality lower energy costs reduced start-up times less waste 100% product inspection less downtime

The team of professionals at MoistTech is very experienced with the requirements in the production of detergents.  Our sensor calibrations, measurement wavelengths, algorithms and sensor optical requirements are pre-set at the factory.  Typical accuracy is about ±0.1% moisture.  Typical analog range is 0-10% moisture and up to as much as 40%, subject to application.  The outputs can be adjusted to optimize PLC or recording requirements.