Having the correct potato granule moisture level has become a critical component during the various stages of production. 

Potato granules can easily become either too wet or dry wasting manufacturer’s time and money as well as impacting the quality of the end product. 

With the help of industry partners and more than 30 years of in-depth knowledge and experience, MoistTech has developed the new IR-3000 Potato Granule Moisture Sensor that is ideally suited to measure the moisture levels in potato granules.

The sensor is coated in a food grade material with a polymer optical window allowing manufacturers to improve product quality and monitor moisture continuously.
 

Installation….

The IR-3000 Potato Granule Moisture Sensor should be installed at the exit of the ovens should be mounted several inches above the conveyor so that it can continuously monitor the process and can control the potato granule moisture content either manually or automatically in the finished product
 

Environment….

If the IR-3000 Potato Granule Moisture Sensor has to be installed close to the oven outlet where it will be susceptible to extreme heat conditions, it may become necessary to cool the sensor with either air or water.

Furthermore, if the sensor is located near an oil spray, it is necessary to clean the sensor’s optical window during regular routine cleaning.
 

Benefits….

improved product quality lower energy costs reduced start-up times less waste 100% product inspection less downtime significant resin cost savings

MoistTech is very experienced with the potato granule moisture requirements in the production of potato granules.  Our sensor calibrations, measurement wavelengths, algorithms and sensor optical requirements are pre-set at the factory.  Typical accuracy is about ±0.2% moisture.  Typical analog range is 5-15% moisture.  The outputs can be adjusted to optimize PLC or recording requirements.