Leather Moisture Applications
There are many key processes in leather production where you will find the leather moisture sensor to be essential. Usage opportunities increase when you consider the capability of the IR-3000 to measure water and solvent based coating thickness, measure resin content, and monitor temperature. The measurement of coating thickness is especially critical in the leather finishing processes. Finishing full grain leathers may involve the application of polymer or wax finishes. Corrected grain leather finishing may involve procedures such as the application of basecoats, pigment coats, and topcoats. For installation parameters specific to your applications, please contact our headquarters. MoistTech is highly experienced regarding the requirements in leather production. Our sensor calibrations, measurement wavelengths, algorithms, and sensor optical requirements are pre-set at the factory. Once installed, you can continuously monitor the process and control moisture content in real time.
Benefits of Leather Moisture Analysis and Control
- Increased Productivity
- Improved Product Quality
- Minimization of Waste and Re-Work
- Lower Energy Costs
- Reduced Environmental Impact
- Continuous Monitoring with 100% Product Inspection
- Process Optimization
The MoistTech IR-3000’s non-drift optical design permits non-contact continuous process monitoring and control so that process variation can be detected and adjusted in real time. Typical moisture accuracy is about ± 0.05%, with coating accuracy varying from 0.1 to 0.01 micron, depending on the coating type. Typical analog range is 0-10% moisture. The outputs can be adjusted to optimize PLC or recording requirements.
Contact our headquarters to speak with our courteous knowledgeable representatives for information regarding your specific applications.