MoistTech Corp. is Changing the Standards in Moisture Measurement

Posted by:

Moisture measurement and control is a crucial aspect of the Biomass and Biogas industries as it allows for reduction in cost, energy, wasted materials, water usage, dust prevention and more. MoistTech Corp™ has been in the moisture control business for over 40 years providing long term solutions to the manufacturing process.   

Increasing Quality

The moisture control levels of raw material infeed to the boiler is a critical component of the combustion process and the monitoring of moisture levels as the materials are being conveyed, giving the opportunity for immediate line adjustments that aren’t normally available. Moisture measurement and control is more than producing a quality product, it is also reducing risks in extremely dusty or flammable environments as well.

Through multiple installations, moisture control has significantly increased the overall quality of products and efficiency within each facility through various points:

                “The addition of the MoistTech IR3000s have provided me with the ability to control our process by instantly increasing or decreasing the material flow into the dryer. This variation of our material flow is based on the moisture content and belt scales to provide a dry weight. Prior to the MoistTech technology proved to be a guessing game and time-consuming OWL laboratory tests post dryer.”

Ideal for chain and screw conveyors, the common the issues with moisture measurement and control occur with blending raw materials, during the combustion process and entering & exiting the dryer. The plant manager’s ability to control the line immediately with adjustments is a huge improvement over old method of time-consuming weighing and drying, wasting valuable time. Quality control is vital on the manufacturing line and the ability to alter certain specifications results in better quality products.

“For the last few years we have integrated the MoistTech Online Sensor into our customer’s scopes with the goal of a fully optimized closed loop control. When integrated with our stacker reclaimed the results are lower operating costs, safer storage and improved product quality. The instant feedback informs our plant personnel of controlled moisture all throughout the entire process.”

A non-contact ‘online’ moisture sensor with hundreds of measurements per second, providing real time accurate measurements can provide a maintenance free alternative to moisture measurement and control.  MoistTech uses a no-drift optical design to ensure the accuracy and repeatability needed, allowing for gaps, color and height changes in the product. The net result is improved quality and reduced production costs by savings in energy and loss reduction.

Production efficiency improvements due to accurate real-time measurements provide both energy savings and potential increased productivity with lower material losses, the sensors use state-of-the-art components allowing installation in the most extreme locations.

State-of-the-Art Technology

Near-infrared (NIR) spectroscopy and imaging are fast and nondestructive analytical techniques that provide chemical and physical information of virtually any matrix. NIR can tell us things about a product in a similar way to visible light. When light hits a product, it will interact in various ways. Transmitted light will pass through the product while backscattered light will reflect from the product. Light will also be absorbed by the product. Absorption is the key to our NIR analysis.

The MoistTech NIR technology is a ratio-based measurement with prime beam. This eliminates the sensitivity to distance, improves stability, improves accuracy and provides a no drift design. Our unique design allows for extremely accurate measurements with far more sensitivity than that of our competitors. This proves us the ability to measure very difficult application where others cannot.


MoistTech is very experienced with the moisture sensing requirements in the combustion process using forest products residue as well as the correct operation of biomass boilers for the assessment of a load of fuel. Most wood fuel boilers are designed to operate with fuel of moisture content of a limited range; feeding fuel that is outside this tolerated range the boiler will either result in inefficiency, leading to increased emissions, or error the control system and fail to function at all.

“The knowledgeable MoistTech Team provides our organization with outstanding support through the development and implementation process.  We have worked together on a variety of different projects and applications; their experience has enabled our engineering team to properly evaluate and design systems that meet with our customer’s requirements”


MoistTech Corp. 6408 Parkland Drive Suite 104, Sarasota, FL 34241

941.351.7870   /

Pack Expo 2017

Posted by:

MoistTech Corp. will be exhibiting at the Pack Expo September 25-27, 2017 in Las Vegas NV at the Las Vegas Convention Center. Be sure to stop by Booth#7804 to see our live demonstration of moisture measurement and control with our state of the art IR3000 sensor and learn how we can help you control the moisture content in your product, leading to increased profits!

MoistTech Completes Move to 8,000 sq. ft Facility!

Posted by:

In August 2017, MoistTech Corp. re-located the main headquarters to a larger facility in Sarasota, FL with over 8,000 sq ft of space to grow and continue to exceed customer’s needs. The move comes with an increased demand of services and not enough room to fully stretch our legs. This new location will house state of the art offices, a lab facility for sample testing, full calibration workshop, large warehouse and much more. We are excited to have more space and look forward to servicing all of your needs!

Please take note of our new contact information:

6408 Parkland Drive Suite 104

Sarasota, FL 34243 


MoistTech Has Been Featured in Plastics Machinery Magzine

Posted by:

MoistTech Corp. was recently asked to participate with Plastics Machinery Magazine as they did a collaboration on moisture meters and their extensive usage. We are proud to be featured in their article and are excited to work with the plastics industry and provide the worlds best industrial moisture sensors!

“Instead of relying on a 10-gram sample to represent an entire hopper full of resin, an in-line moisture analyzer allows an operator to know the moisture content of all the resin coming out of a hopper, going into a machine or even at the hopper inlet, according to the company. That information allows the operator to adjust drying times based on moisture content before drying takes place.”

See the whole article here

Broaden Moisture Sensing Capabilities in Food with MoistTech

Posted by:

This month MoistTech Corp. was featured in the SNAC Report, produced by SNAC International, highlighting the importance of moisture control in foods and how the MoistTech technology can allow you to create unsurpassed quality products. 

How greatly does moisture affect the outcome of your product? If the quality of your product depends on moisture measurement and control, MoistTech Corp™ introduces the ultimate solution for you in quality control

Moisture sensing technology is certainly not a new concept but many forms used are inconsistent, time consuming, and simply not accurate. MoistTech Corp. is the original manufacturer of Near-Infrared (NIR) technology in the industrial moisture industry and manufactures a range of on-line sensors & at-line instruments for moisture measurement and real-time moisture process control for the snack and bakery food industries.

Controlling the amount of moisture and oil in potato chips and snack foods is an important consideration for process operators: too little or too much moisture or oil impacts production and quality. By installing MoistTech’s IR3000 NIR Moisture Sensor in the processing area, manufactures can continuously monitor the moisture and oil content to adjust as needed.


Read the whole article here 


Implementing Process Control in Nonwovens with MoistTech

Posted by:

MoistTech Corp. has been featured on this month for our ability to control coat weight and thickness in the nonwovens industry. 

“Instrumentationion and process control are essential aspects of the manufacturing line in the Nonwovens industry and many process variables are used for proper control. Coat weight & thickness measurement & control has countless benefits on the manufacturing line including: higher quality final product, consistency of the final product, reduced energy costs from downtime, less waste, plant production efficiency monitoring, lower costs and increased productivity.”

Read the full article here

Process Control On The Manufacturing Line

Posted by:

Process Control on The Manufacturing Line


Instrumentation and process control are essential aspects of the manufacturing line in the Powder & Bulk Solids industry and many process variables are used for proper control. Moisture measurement and control has countless benefits on the manufacturing line including: higher quality final product, consistency of the final product, reduced energy costs from downtime, less waste, plant production efficiency monitoring, lower costs and increased productivity.

MoistTech Corp.™ has mastered the art of moisture measurement and control utilizing cutting edge Near-Infrared (NIR) technology to help you achieve a superior product. Insensitive to material variations such as particle size, material height and color and gaps in product, these state-of-the-art sensors provide continuous, reliable readings with zero maintenance. There is a one-time calibration with a non-drift optical design allowing operating personnel to confidently make immediate process adjustments based on real-time measurements. With top of the line components, these sensors can be installed in the most extreme conditions and locations.

MoistTech Corp Exhibitor Spotlight Feature

Posted by:

We spoke to the Director of MoistTech Corp, John Fordham about their development drivers, the MoistTech IR3000 and Ceramics Expo. 

John’s history in the ceramics industry began in the late 1970s with the development of the NIR (Near Infrared) online moisture sensor. This technology has opened many doors into ceramics product quality control by measuring the moisture content instantly online with great accuracy. Several generations of sensors have allowed John to visit many of the industry leaders and help them monitor product quality.

Ceramics Expo – CEX
John Fordham – JF

CEX: Which customer or market demands were the biggest drivers of your company’s growth during the past three years?

JF: The ceramics industry has shown a large need for the MoistTech IR3000 and our experience. Improving product quality, cutting costs and controlling the process have been very big drivers.


CEX: Do you anticipate that those demands will continue to be your biggest growth drivers for the next three years, or are you anticipating new trends?

JF: We do anticipate a continued demand in these areas. Of course, as the industry changes and the market increases, trends will transform.


CEX: What are your areas of R&D focus, and what timeline do you anticipate for bringing your next new products to market? Can you tell us anything about those products?

JF: Our current R&D focus is to improve our technology using the latest available energy sources, and increase our measurement capabilities. We are considered the industry leader and will continue our efforts to stay ahead of current customer requests.


CEX: What is your company’s approach to strategic partnerships or joint ventures, and what kinds of partnerships are you most open to exploring?

JF: MoistTech holds a considerable number of partnerships in the industry. We consider these partnerships to be key to keeping up with the market. We are always open to any partnership in product development and improving quality control.


CEX: What products will you be featuring at the show this year and what response are you expecting?

JF: MoistTech will be featuring our flagship online NIR moisture sensors: the IR3000 and 3000 Series sensors. We do expect continued interest and growth in our application installations.


CEX: Why are you exhibiting and what connections do you hope to make there?

JF: MoistTech will be exhibiting this year to help educate the industry on the importance of moisture control/monitoring. We are excited to provide a cost-effective solution that can help the ceramics industry. 


Full Article Feature


MoistTech Embraces Change In Re-Brand!

Posted by:

MoistTech Corp Re-brands!

For many years MoistTech Corp.™ has gone by the same look and we thought it was about time for a big change! Since October of last year we have been diligently working to re-brand the company so that it aligns with our customer base to more efficiently and effectively serve their needs. With over 40 years of experience, we intend to maintain our superior customer service and continue to provide you with state-of-the-art technology to grow your business and provide your customers with unsurpassed products. The only thing we have changed is our look and logo, everything else great about MoistTech remains the same!

As we continue our re-branding process throughout all aspects of the business, we invite you to explore our Social Media pages: FacebookTwitterInstagramYouTube and LinkedIn for live updates & fun stories and to also check out our new materials we have available to you as well:

  IR3000 Brochure

   IR3000-WP Brochure (Wood Products)

  IR3000-F (Food Grade)

  828 Series (Tobacco)

  IP67-Rated (Stainless Steel)

  CCS3000 (Coke, Coal & Sinter)

  868 Series At-Line (Laboratory Sample Testing)

  Full Product Catalog 


To receive a full copy of any of our brochures please complete this form


We are excited about the change and hope that you are as well – stay tuned for the final phases of the re-brand coming soon and be sure to come see us at all of our shows this year!


Global Gypsum Conference in Poland

Posted by:

Join MoistTech Corp for the 17th annual Global Gypsum Conference is well-known around the world as the largest meeting of gypsum professionals and as the must-attend gypsum event. The conference in 2017 will meet in the centre of Europe – on the borders of East and West – in historic Kraków – and will appeal to gypsum and wallboard producers from around the globe.

Kraków is an outstanding location for the 17th Global Gypsum Conference, being centrally-located, easy to reach and offering visitors from east and west a warm welcome. Kraków and the brand-new five-star conference hotel itself offer attendees great value-for-money in a self-contained world-class conference venue. The Global Gypsum Exhibition is expected to be the largest ever staged.

Strong delegate groups are expected to attend from Western Europe, Eastern Europe, Russia and the CIS and the Middle East, as well as from around the rest of the world.

Learn more about our On-Line CCS-3000 series sensor that can help control moisture measurements in Gypsum and products like it

25 – 26 October 2017, Kraków, Poland

Page 4 of 15 «...23456...»