The Challenge
A wood pellet production facility processes wood chips and sawdust through grinding and a single-pass rotary dryer before further size reduction and distribution to pellet machine feed bins.
Maintaining consistent moisture at this stage is essential for downstream pellet production. The facility required reliable moisture feedback to automatically regulate its dryer, with a backup communication method available if the primary Ethernet connection experienced an error.
The Solution
IR-3000 Sensor
A MoistTech IR-3000 Near-Infrared Moisture Sensor was installed downstream of the dryer and secondary grinding process, before the wood fiber enters the pellet machine feed bins.
The sensor continuously measures moisture content and communicates directly with the facility’s PLC through Ethernet. The PLC uses this real-time moisture feedback to automatically regulate dryer operation, creating a closed-loop control system designed to maintain consistent moisture levels.
For additional reliability, the customer connected an analog output as a backup measurement signal. If Ethernet communication is interrupted, the PLC is configured to use the analog signal, allowing moisture feedback to remain available for dryer control.
The Results
Automated Dryer Control: Improved durability and sheen with tight moisture control parameters.
Built-In Communication Redundancy: The customer’s PLC is configured to switch to the IR-3000’s analog moisture signal if Ethernet communication fails, providing a backup path for continued moisture-based dryer control.
Consistent Moisture Control: The system is designed to maintain consistent moisture before dried wood fiber enters the pellet machine feed bins.
Improved Process Visibility: Continuous measurement gives the control system current moisture information for dryer regulation.



