Adhesive Coat Weight Measurement Reduces Setup Time by Up to 50%

A packaging manufacturer applying water-based adhesives to various substrates relied on calculating adhesive coat weight after production using material consumption and substrate surface area.

This approach provided only an average across the entire run, making it difficult to identify missing or uneven coatings. Previous attempts to improve measurement using redundant consumption-monitoring systems created additional confusion.

IR3000 Sensor

A MoistTech IR3000 sensor was installed immediately after the adhesive coating process and paired with a programmable linear slide.

The system provides real-time coat weight measurements across the substrate width, allowing operators to identify coating inconsistencies and make corrections earlier in production.

50% Faster Setup: Reduced the need for laboratory coat weight verification which reduced the start up times by 50%!

Earlier Defect Detection: Missing or uneven adhesive coatings can be identified during processing.

Substantially Reduced Waste: Earlier corrections help prevent defective coated material from continuing through production

Better Measurement Visibility: Real-time readings across the substrate replace reliance on whole-run averages.

Project Details

Industry

Converting

Application/Product

Adhesive Coat Weight

Location

Midwest, United States

Case Study Infographic

MoistTech IR3000 adhesive coat weight measurement case study showing up to 50% faster setup and reduced coating waste.Click to enlarge ↗

Immediately Seen Benefits

FASTER SETUP

By up to 50%

EARLIER DETECTION

Of missing or uneven coating

SUSTAINABILITY

Reduced Waste

BETTER MEASUREMENT VISIBILITY

Installation Photos
Side view of MoistTech IR3000 near-infrared sensor installed above a moving coated substrate for real-time adhesive coat weight monitoring.
Close-up of the MoistTech IR3000 installed above a moving substrate for continuous adhesive coat weight monitoring.
MoistTech IR3000 sensor mounted on a programmable traversing system measuring adhesive coat weight across a moving substrate.
MoistTech's IR3000 measures adhesive coat weight across a moving substrate using a programmable traversing system.

The system provides real-time coat weight measurements across the substrate width, allowing operators to identify coating inconsistencies and make corrections earlier in production.

IR3000: Continuous, Non-Contact Readings:
MoistTech IR-3000 non-contact NIR moisture sensor
  • Consistent, Continuous Readings
  • 0.01% Repeatable Data & Accuracy
  • Easy to Use
  • Integrates Seamlessly into PLC
  • Reduces Waste Immediately
  • ROI In Less than 30 days

Catch Coating Problems Before They Become Costly

Stop waiting until production is complete to identify coating inconsistencies. Discover how MoistTech's IR3000 provides real-time adhesive coat weight measurements to help reduce setup time, minimize material waste, and maintain consistent coating quality.

Talk to a MoistTech Specialist