Wood fiber moisture sensor

Wood Fiber Processing

A wood pellet production facility processes wood chips and sawdust through grinding and a single-pass rotary dryer before further size reduction and distribution to pellet machine feed bins.

Maintaining consistent moisture at this stage is essential for downstream pellet production. The facility required reliable moisture feedback to automatically regulate its dryer, with a backup communication method available if the primary Ethernet connection experienced an error.

IR-3000 Sensor

A MoistTech IR-3000 Near-Infrared Moisture Sensor was installed downstream of the dryer and secondary grinding process, before the wood fiber enters the pellet machine feed bins.

The sensor continuously measures moisture content and communicates directly with the facility’s PLC through Ethernet. The PLC uses this real-time moisture feedback to automatically regulate dryer operation, creating a closed-loop control system designed to maintain consistent moisture levels.

For additional reliability, the customer connected an analog output as a backup measurement signal. If Ethernet communication is interrupted, the PLC is configured to use the analog signal, allowing moisture feedback to remain available for dryer control.

Automated Dryer Control: Improved durability and sheen with tight moisture control parameters.

Built-In Communication Redundancy: The customer’s PLC is configured to switch to the IR-3000’s analog moisture signal if Ethernet communication fails, providing a backup path for continued moisture-based dryer control.

Consistent Moisture Control: The system is designed to maintain consistent moisture before dried wood fiber enters the pellet machine feed bins.

Improved Process Visibility: Continuous measurement gives the control system current moisture information for dryer regulation.

Project Details

Industry

Wood Products

Application/Product

Wood Fiber

Location

Northeastern, USA

Case Study Infographic

MoistTech IR3000 wood fiber moisture measurement case study showing automated dryer control and pellet productionClick to enlarge ↗

Moisture Measurement in Wood Fiber Processing
raw biomass

WOOD CHIPS & SAWDUST

Incoming Raw Material

grinding biomass

INITIAL GRINDING

Size reduction to specified grind

SINGLE PASS ROTARY DRYING

Moisture is reduced to the target range

grinding biomass

SECONDARY GRIDNING

MOISTTECH IR3000 SENSOR

MoistTech's IR3000 monitors moisture in real time

biomass storage

PELLET MACHINE & FEED BINS

Installation Photos
wood fiber processing

“We use the meter to automatically control the dryer system. I have the analog connected as a backup which the PLC will use if there is an Ethernet communication error.”

— Wood Fiber Processing Customer
Near-Infrared IR3000 Specs
MoistTech IR-3000 non-contact NIR moisture sensor
  • Automated Dryer Control
  • Consistent Moisture Content
  • Reliable Communication Backup
  • Closed-Loop Process Control
  • Reduced Manual Intervention
  • Improved Production Consistency

Ready to Improve Your Production Process?

See how real-time NIR moisture measurement supports closed-loop dryer control in wood pellet production.

Talk to a MoistTech Specialist