Efficiently Control Moisture Content
Fiberglass has endless applications in the modern world. The raw materials that make up fiberglass can be manipulated in endless ways to make all sorts of things. But whether you are manufacturing fiberglass textiles or fiberglass boats, one thing is certain: quality control is critical. Which entails fiberglass moisture content during production.
Moisture content, temperature, chemical composition—all of these must be carefully measured and regulated to guarantee the best quality end product is achieved. To do this, you need an accurate product testing instrument with a wide variety of capabilities.
The IR-3000 is a fiberglass moisture gauge capable of accurately testing more than just moisture. By taking instant, non-contact measurements of temperature, water-based coatings, and other vital fiberglass levels, it combines the features and capabilities of multiple instruments into one convenient system.
Unsurpassed in performance, our sensors can accurately measure moisture within tenths of a percent of most applications
MoistTech sensors withstand the test of time and are low to zero maintenance
Rely on MoistTech’s NIR moisture sensors to never drift or need re-calibration
COST OF OWNERSHIP
A moisture measurement system is essential for the production process and in some cases will pay for itself in less than 30 days
Energy efficient and low maintenance, the IR-3000 cuts production costs. Not only will your start-ups and down times be reduced, but the accurate measuring and regulating of moisture and other levels will ensure the best quality end product. For the best performing fiberglass moisture analyzer with endless capabilities, look no further than the IR-3000.
What is the Solution?
MoistTech has studied moisture and its applications in manufacturing for over 40 years. That’s why we’re confident our moisture analyzers are a step above the rest. We’re constantly working to develop the latest, most advanced moisture testing technology—which is how the IR-3000 came about.
We’ve combined our decades of experience and knowledge with feedback from our industry partners to create a moisture sensor capable of taking instant, non-contact measurements of moisture, temperature, and other vital levels with the utmost accuracy. When it comes to moisture sensors, the IR-3000 is the most advanced system available.
Locate the point in the production process in which measuring moisture will be the most crucial and beneficial. Identify how you will use the moisture measurement data for improvements and if it will tie into your PLC.
Remember this could involve more than one installation point!
A closed loop process is achieved by incorporating a moisture measurement system into the manufacturing process. Developing a proactive solution to moisture control will avoid costly downfalls.
MoistTech’s experts will assess your specific application with lab tests, calibrations and accuracy results to ensure our equipment will peform for you. All of our sensors are pre-calibrated prior to being shipped to create a plug-and-play operation for the end-user.
Understand the Process
Using the IR-3000 drastically cuts production costs. It is energy efficient, low maintenance, and decreases startup and down times. Over dried product causes waste; so does product that is too moist. With the IR-3000, these problems will no longer be an issue.
Using the IR-3000, you’ll save money throughout the entire production process, while making the best quality product at the same time. With MoistTech, you don’t need to compromise.